Epson 5000 User Manual
Page 80
2.
While holding down the
ALT
button, press
the LOAD/EJECT
button to feed the paper forward or the
LF/FF
button to
feed the paper backward, as indicated by the arrows above
the buttons.
Adjusting the loading position
The loading position is the position of the paper after it has
been automatically loaded by the printer. If printing is too high
or low on the page, change the loading position with the
micro-feed feature as follows:
1.
Make sure the printer is turned on. If necessary, lift the
printer cover up so you can see the paper position.
2. Load either continuous or single-sheet paper. (Load
continuous paper by pressing the
LOAD/EJECT
button.)
The
MULTI-PART light
begins to flash.
Note:
You can adjust the loading position only while the MULTI- PART light
is flashing.
Using the Printer
3-15
- C8230
- 400
- 400
- 600
- 640
- 700
- 850
- 1520
- C82314
- RS-485
- 6200A
- C82307
- UB E02
- 440
- 440
- 660
- 5000
- 9000
- ARM.POWERED ARM720T
- SD-DSPUSBB
- CMD-2260
- C823301
- S1C6200A
- 33+
- FEH300b
- SED 1520 Series
- Serial Interface GQ-3500
- ETX-945
- Photo EX
- C82364
- 214D-1
- EM07ZS1647F
- Connect-It SD-DSWIFIB
- ACTIONPC 7000
- S5U1C63000H2
- C824
- C82069*
- 80211b
- C82312
- S5U1C17801T1100
- C82324*
- C82372
- C82315
- P07303
- C82332
- MultiRIP Ethernet Card
- Past Ethernet Combo Print Server PS-1216U
- S5U1C62000A
- PSB.2003.04.003
- Connect-It SD-DSP7B
- SD-USBA
- C82310
- S1C63558
- C82346
- MF1466-01
- Computer Hardware
- C82605
- S1C62 Family
- BT-0260
- S1C88650
- Connect-It SD-DSETHC
- XDT
- VIGOR 3300
- IWE3200-H
- Bi-directional Parallel Interface Board B80818*
- SED1278F/D
- PC800 EN
- 9000 EN
- 400EN