HP 3200m - Manual (Page 29)

EN Loading print media
27
To load special items
When loading items to be faxed, copied, or scanned, you need to
protect small, fragile, lightweight (less than 12 lb. or 46 g/m
2
), or
irregularly sized items such as receipts, newspaper clippings,
photographs, and old or worn documents.
1
Do one of the following:
• Place the item in a carrier sheet. You can buy a carrier sheet,
or you can make one by taping a transparency and piece of
paper together along one of the short sides. Insert the item to
be faxed, copied, or scanned into the carrier, and insert the
carrier into the document feeder tray, taped edge first.
• Using clear tape, tape the leading and trailing edges of the
item to a sheet of letter- or A4-size paper. If the item is not
square or rectangular, tape all edges of the item to the paper.
• If you have use of a standard size copier, copy the item first
and then send the copy through the scanner.
2
Adjust the guides in the document feeder tray to fit the size of the
item you are loading.
3
Locate the special media lever (see “Identifying hardware parts”
on page 21) on the top edge of the control panel and move it to
the right.
CAUTION
Do not move the lever after the product has begun sending the page.