HP 3200m - Manual (Page 30)

28
Chapter 2 - Getting to Know the Product EN
4
Load only one sheet at a time, top first, face down, into the
document feeder tray.
Note
If you are loading a business card, load it
long
edge first.
5
Move the special media lever back to the left after special items
have been fed. A stack of regular pages sent with the lever to the
right can go through in multiples, and can cause jams.
Loading media to be printed
You can load media to be printed in paper input tray or in the single-
sheet input slot. See the instructions in this section for more
information.
Loading the paper input tray
You can load up to 125 sheets of 20 lb (75 g/m 2 ) media into the paper
input tray, or you can feed one sheet at a time into the single-sheet
input slot.
Note
Insert all media vertically (portrait orientation) into the paper input tray
or single-sheet input slot. If you want to print horizontally (landscape
orientation), make that selection through your software. The product
cannot print on paper smaller than 3 by 5 inches (76.2 by 127 mm).
The product prints, copies, and prints received faxes using media
from the paper input tray (or the single-sheet input slot).
To load the paper input tray
1
Adjust the guides on the paper input tray to fit the size of media
you are loading.