Selecting tone- or pulse-dialing mode – HP 3200m User Manual
Page 84
82
Chapter 4 - Faxing
EN
To change the default resolution
The choices for this setting are Fine (the factory default), Standard,
Superfine, and Photo. See “Resolution options” on page 62 for more
information.
Note
If you only want to change the resolution for the fax job you are currently
sending, see “Adjusting the resolution for the current job” on page 62.
1
Press
E
NTER
/M
ENU
.
2
Use the
<
or
>
key to select
FAX SETUP
and then press
E
NTER
/
M
ENU
.
3
Use the
<
or
>
key to select
FAX SEND SETUP
and then press
E
NTER
/M
ENU
.
4
Press
E
NTER
/M
ENU
to select
DEFAULT RESOLUTION
.
5
Use the
<
or
>
key to select
FINE
(the default),
STANDARD
,
SUPERFINE
, or
PHOTO
.
6
Press
E
NTER
/M
ENU
to save your selection.
Selecting tone- or pulse-dialing mode
Use this procedure to set the product to tone- or pulse-dialing mode.
You can use this procedure to set the product to tone- or pulse-dialing
mode. The default is set to Tone. Leave this as Tone unless you
know your telephone is incapable of tone dialing.
To select tone- or pulse-dialing
1
Press
E
NTER
/M
ENU
.
2
Use the
<
or
>
key to select
FAX SETUP
and then press
E
NTER
/
M
ENU
.
3
Press
>
once to select
SEND SETUP
and then press
E
NTER
/M
ENU
.
4
Use the
<
or
>
key to select
DIALING MODE
and then press
E
NTER
/M
ENU
.
5
Use the
<
or
>
key to select
TONE
or
PULSE
and then press
E
NTER
/M
ENU
to save your selection.