Marantz PMD671 - Manual (Page 28)

- 28 -
Beep
When battery charge can provide no more than
1-3 minutes of recording or playback and Beep is
set to On, the CHARGE indicator, REC indicator
and the battery indicator in the display will flash,
and the PMD671 will beep through the head-
phones or speaker.
If the PMD671 is not operated for 30 minutes
during stop or play pause, power can be auto-
matically shut off to conserve battery life. (See
A.PowOFF.) If A.PowOFF is set to Yes, and Beep
is set to ON, the PMD671 will beep to alert you
that the power is shutting off.
Default is Beep On.
How to set or change the Beep
Example
display
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Press F.FWD/+ 3X ................................ Beep
Press ENTER ................................ Off or On
Press F.FWD/+ .............................. Off or On
Press ENTER ....................................... Beep
Press MENU/STORE .................... store & exit
2. While Preset is flashing, press and release
the F.FWD/+ button repeatedly until Beep
is displayed.
3. Press and release the ENTER button .
The On-Off choice will flash.
4. Press and release the F.FWD/+ button or
the -/F.REV button to toggle between
On and Off.
5. When the desired state appears press and
release the ENTER button .
The display returns to Beep flashing.
You can:
•
Press and release the F.FWD/+ button or the -/
F.REV button to tab to another menu choice, or
• Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
• Press and release the CANCEL button to cancel all
menu changes and return to stop mode.
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Press F.FWD/+ 4X ......................... A.PowOff
Press ENTER ................................ Yes or No
Press F.FWD/+ .............................. Yes or No
Press ENTER ................................ A.PowOff
Press MENU/STORE .................... store & exit
Automatic Power Off
If the PMD671 is not operated for 30 minutes
during stop or play pause, power is automatically
shut off to conserve battery life when A.PowOff is
set to Yes.
Default is A.PowOFF Yes
How to set or change Automatic Power Off
2. While Preset is flashing, press and release
the F.FWD/+ button repeatedly until
A.PowOff is displayed.
3. Press and release the ENTER button .
The Yes-No choice will flash.
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
Example
display
Example
display
Example
display
Example
display
Example
display
Example
display
Example
display