Marantz PMD671 - Manual (Page 38)

- 38 -
How to set or change Auto Mark
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Double Click ENTER .................. RecFormat
Press F.FWD/+ until ..................... Auto Mark
Press ENTER ..................................... Off/On
Press F.FWD/+ ........................ toggle Off/On
Press ENTER ............................... Auto Mark
Press MENU/STORE .................... store & exit
button for about 2 seconds.
2. With Preset
flashing in the
display double
click the ENTER button .
3. Press and re-
lease the F.FWD/
+ button
until
4. With Auto Mark
flashing. press
and release the
ENTER button
.
5. Press and re-
lease the F.FWD/
+ button
to
toggle between
On and Off.
6. When correct,
press and re-
lease the ENTER
button
.
Auto Mark is displayed.
Auto Mark menu choice is flashing.
The display returns to Auto Mark flashing.
You can:
•
Press and release the F.FWD/+ button or the -/
F.REV button to tab to another menu choice, or
• Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
• Press and release the CANCEL button to cancel all
menu changes and return to stop mode.
1. From stop, press
and hold the
MENU/STORE
button for about 2 seconds.
2. With Preset
flashing in the
display, double
click the ENTER button .
3. Press and release the F.FWD/+ button
until Manual TR is
displayed.
. Manual TR menu choice is flashing.
How to set or change Manual TR
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Double Click ENTER .................. RecFormat
Press F.FWD/+ until .................... Manual TR
Press ENTER ..................................... Off/On
Press F.FWD/+ ........................ toggle Off/On
Press ENTER .............................. Manual TR
Press MENU/STORE .................... store & exit
5. Press and release
the F.FWD/+
button
to
toggle between On and Off.
4. With Manual TR
flashing, press
and release the
ENTER button
1. From stop, press
and hold the
MENU/STORE
Manual TR
When Manual track incrementing is on, slide and
release the REC switch during recording to
increment the track. A new track is created at that
point. There is no break in recording. When
Manual track incrementing is off, sliding and
releasing REC switch during recording does
nothing.
Default setting is On.
6. When correct,
press and release
the ENTER button
.
The display returns to Manual TR flashing.