Marantz PMD671 - Manual (Page 43)

- 43 -
2. With Preset
flashing, in the
display, double
1. From stop,
press and hold
the
MENU/
STORE button for about 2 seconds.
2. With Preset
flashing in the
display, double
click the ENTER button .
3. Press and
release the
F.FWD/+ button
4. With SinglePly
flashing, press
and release the
5. Press and
release the
F.FWD/+ button
to toggle
between On and Off.
6. When correct, press and release the ENTER
SinglePly flashing.
You can:
•
Press and release the F.FWD/+ button or the -/
F.REV button to tab to another menu choice, or
• Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
• Press and release the CANCEL button to cancel all
menu changes and return to stop mode.
until SinglePly is displayed.
ENTER button .
On/Off menu choice flashing.
button .
The display
returns to
toggle between On and Off.
6. When correct,
press and
release the
ENTER button .
The display returns to S.Monitor flashing.
You can:
•
Press and release the F.FWD/+ button or the -/
F.REV button to tab to another menu choice, or
• Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
• Press and release the CANCEL button to cancel all
menu changes and return to stop mode.
SinglePly
Off - During playback, when Single Play and
Auto Cue are Off and the end of a track is
reached, the next track automatically starts
playing.
On - During playback, when Single Play is On
and the end of a track is reached, the PMD671
automatically pauses. If Auto Cue is also On in
play cues to start of audio.
Default setting is Off.
How to set or change SinglePly
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Double Click ENTER .................. RecFormat
Press F.FWD/+ until ...................... SinglePly
Press ENTER ..................................... Off/On
Press F.FWD/+ ........................ toggle Off/On
Press ENTER ................................ SinglePly
Press MENU/STORE .................... store & exit
click the ENTER button .
3. Press and release the F.FWD/+ button
until S.Monitor is
displayed.
4. With S.Monitor
flashing, press
and release the
ENTER button
.
On/Off menu choice is flashing.
5. Press and re-
lease the F.FWD/
+ button
to