Invacare LYNX PANTHER LX-4 User Manual
Page 49
49
49
PROCEDURE 11
REPLACEMENT PARTS - PANTHER MX - 4
R
E
P
L
A
C
E
M
E
N
T
P
A
R
T
S
13. Position the rubber spacer and the front bumper
so that the mounting holes in the rubber spacer
and the front bumper align with the mounting
holes in the front shroud assembly.
14. Secure the rubber spacer and the front bumper
to the front shroud assembly using the two (2)
screws, spring washers and washers. Securely
tighten.
Plastic
Guards
FIGURE 1 - REMOVING/INSTALLING HEAD LIGHT ASSEMBLY
Red/Black
Cables
Head light
Assembly
Screws
Spring
Washer
Washer
Front
Bumper
Rubber
Spacer
Screw
Washer
Plate
Self-
locking
nut
Washers
Long Screw
Spring
Washer
Spring
Metal
Connectors
Washer
Front Shroud Assembly
Bracket
15. Return the front frame assembly to the upright
position.
16. Reassemble the front frame assembly and the
rear frame assembly. Refer to TRANSPORT-
ING THE SCOOTER in PROCEDURE 10 of the
Owner’s Manual, part number 1090132.
Self-locking
nut
Spring
Washer
Washer
Tiller
Wiring
Harness
REMOVING, STEPS 7-8/
INSTALLING, STEPS 2-7
Red/Black
Cables
P
A
N
T
H
E
R
M
X
4