Intel SERVER SYSTEM SR2500AL - Manual (Page 100)

78 Intel® Server System SR2500AL User’s Guide
7. Install the large air baffle. For instructions, see “Installing the Large Air Baffle” .
8. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
9. Plug all peripheral devices and the AC power cable(s) into the server.
Removing the RAID Activation Key and the RAID Mini DIMM
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” .
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see “Removing the System
Cover” .
4. Remove the large air baffle. For instructions, see “Removing the Large Air Baffle” .
5. Remove the RAID activation key by lifting straight up (see letter “A” in the figure
below).
6. Remove the RAID mini DIMM by releasing the retention mechanism (see letter
“B” in the figure below) and pulling the DIMM out of the socket (see letter “C” in
the figure below).
Figure 68. Removing the RAID Activation Key and the RAID Mini DIMM
7. Install the large air baffle. For instructions, see “Installing the Large Air Baffle” .
8. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
9. Plug all peripheral devices and the AC power cable(s) into the server.
A
B
B
C
AF000745