Intel SERVER SYSTEM SR2500AL - Manual (Page 45)

Intel® Server System SR2500AL User’s Guide 23
Slimline Optical Drive Carrier
The slimline optical drive carrier can be used with an optional optical drive. One slimline
carrier is included with your server system; the optical drive must be purchased separately.
You cannot install both an optical drive and a USB floppy drive.
The slimline optical drive carrier can be inserted or removed only when system power is
turned off. Drives in the optical drive carrier are NOT hot swappable. For installation
instructions on installing an optical drive, see “Installing or Removing a Slimline Optical
Drive or Internal USB Floppy” .
To use one of the drives provided by Intel, use the following order codes:
• Slimline CD-ROM Drive: AXXSCD
• Slimline DVD/CDR Drive: AXXDVDCDR
Note: The Intel
®
Server System SR2500ALLX and/or the Intel
®
Server System SR2500ALBRP
does not support all slimline optical drives. See “Server System References” for an
Internet link to a list of supported hardware. Intel provides accessory kits for these drives.
Advanced Management Options
Intel® Remote Management Module
The Intel
®
Remote Management Module is available to provide advanced server
management features.
For installation instructions on installing the Intel
®
Remote Management Module, see the
instructions provided with the management module.
Rack-Mounted Systems
Your Intel
®
Server System SR2500ALLX and/or the Intel
®
Server System
SR2500ALBRP can be mounted into a rack. Intel provides three options to mount this
server into a rack. When installing the chassis into a rack, Intel recommends you install
systems from the bottom of the rack to the top. In other words, install the first system in
the rack into the bottom position of the rack, the second system in the second position
from the bottom, and so on. Instructions for installing your chassis into a rack are included
in the rail kit.