John Lewis JLDUOS705 - Manual (Page 26)

26
To fit the Main Fan Oven
Shelves
The shelves should be fitted with the straight rods
uppermost on the frame and the forms towards the
back of the oven.
To remove a shelf slide the shelf towards you until
the shelf stop is reached. Tilt shelf up at the front so
that the stops clear the side supports. Lift shelf
clear. To install a shelf, reverse the above steps.
Each shelf position has an upper and lower support
wire, ensure the shelf is placed between these two
support wires
.
Hints and Tips
•
Arrange the shelves in the required positions
before switching the oven on. Shelf positions
are counted from the bottom upwards.
•
When cooking more than one dish in the fan
oven, place dishes centrally on different shelves
rather than cluster several dishes on one shelf,
this will allow the heat to circulate freely for the
best cooking results.
•
When batch baking one type of food, e.g.
Victoria sandwich cakes, those of similar size will
be cooked in the same time.
•
It is recommended that when baking larger
quantities, the shelf positions should be evenly
spaced to suit the load being cooked. A slight
increase in cooking time may be necessary.
•
Do not place baking trays directly on the oven
base as it interferes with the oven air circulation
and can lead to base burning; use the lower shelf
position.
Do not place cookware and cooking pots
with rough bases e.g. cast iron on the
oven door as damage to the glass may
occur.
14
1