John Lewis JLDUOS705 - Manual (Page 33)

33
1.
Holding the oven glass with both hands, gently
place the locators into the holes of the brackets
at the bottom of the oven door.
2. Holding the door glass with your left hand, use
your right hand to open the oven door.
Bring the door gently towards the glass panel
ensuring the screw location holes line up.
3. Place the trim in the correct position on the top
of the grill door.
4. Hold the glass in place with one hand and insert
the cross head screws with washers into the
location holes with the other hand. Give the
screws one turn to ensure the glass is secure.
5. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
Do not attempt to use the oven without
the glass being in place.
To Clean the Inner Glass
Door
The inner glass door is not removable. Clean using
hot soapy water or Hob Brite and a soft cloth. Do
not use abrasives as they may damage the glass or
seal.
Cleaning the Shelves, Wire-
work runners and Grill/Oven
furniture
All removable parts, except the grill pan handle can
be washed in the dishwasher.
The grill pan, grill pan grid, oven shelves and
wirework runners may be cleaned using a soap
impregnated steel wool pad. Soaking first in hot
soapy water will make cleaning easier.
How to Replace the Oven
light
The type of bulb required is a 300°C, 25 watt small
Edison Screw.
Disconnect the appliance from the
electricity supply before replacing the
bulb.
1. Make sure the appliance is cool before replacing a
bulb.
2. Open the door and remove the shelves and
wirework runners.
3. Pull the glass bulb cover towards you and then pull
it off. If necessary use a screwdriver to carefully
lever off the cover, taking care not to damage the
oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass bulb
cover.
6. Refit the wirework runners and replace the oven
shelves.
7. Restore the electricity supply and reset the time of
day.
How to Replace the outer
Door Glass
)
)