Socket Mobile Series 7 - Manual (Page 18)

6. Your device will begin searching for the CHS.
• If you installed Connect!Agent, your mobile device will automatically
search for and connect to the CHS. A beep will indicate the
connection.
• If you did not install Connect!Agent, your device’s Bluetooth
software will search for devices. In the list of found Bluetooth
devices, select Socket CHS. The device will connect to the CHS,
indicated by a beep.
If using the Broadcom (Widcomm) stack, you will be prompted to
configure automatic connections.
If a passkey is requested, enter 1234.
7. After your mobile device connects to the CHS, the scanner will beep
once. The SocketScan icon at the bottom of the Today screen will
change into a scanner icon to indicate the connection.
Connect!Agent will save information about the CHS to automate future
connections to your specific unit.
18