Socket Mobile Series 7 User Manual
Page 48
4. After a successful scan, data should appear in your document. By default,
the cursor automatically advances to the next cell or line, ready for the
next scan.
Wait for the “Good Scan” indication before you scan another bar code.
If you try to scan too fast, the device can lock up until you stop scanning.
If your computer suspends or the CHS is moved out of range, the
connection will be lost. After the computer turns on again or returns in
range, SocketScan will try to re-connect according to the “auto re-
connect” settings you chose in SocketScan.
After the time limit for re-connection attempts has passed,
you can click on the Socket CS Connect icon on the desktop
to manually initiate re-connection.
To end the connection, click on the SocketScan icon and click Disconnect CS.
The CHS will beep twice to indicate the connection has ended.
To turn off the CHS, press the power button on the wrist unit for at least
2 seconds, until the LED stops blinking.
For information about third-party applications compatible with the CHS
for asset tracking, warehouse mobility, and other vertical markets, visit:
48