Socket Mobile Series 7 User Manual
Page 20
4. After a successful scan, data should appear in your document. For
example, after you scan a bar code into a Pocket Excel spreadsheet, data
should appear in the first cell. The default “CR” (carriage return) suffix
will advance the cursor to the next cell, ready for the next scan.
Wait for the “Good Scan” indication before you scan another bar code.
If you try to scan too fast, the device can lock up until you stop
scanning.
If your mobile device suspends or the CHS moves out of range, the
connection will end. After the mobile device turns on again or returns in
range, SocketScan will try to re-connect 3 times. If, after the 3 attempts,
they have not re-connected, you will need to manually re-connect the
devices.
To turn off the CHS, press the power button for at least 2 seconds, until
the LED stops blinking.
For information about third-party applications compatible with the CHS
for asset tracking, health care, and other vertical markets, visit:
20