Socket Mobile Series 7 - Manual (Page 26)

STEP 2: Connect CHS to PDA with Bluetooth
1. Turn on the Cordless Hand Scanner. Press the
small power button for five seconds, until you
see the LED turn blue. The LED should blink blue
once every second to show that the Bluetooth radio
is on but not connected. If the LED begins
blinking red, the battery needs to be recharged.
2. Start SocketScan. Tap Home. In the upper right corner, make sure All is
selected. Scroll down and tap on the SocketScan icon.
3. The main screen of SocketScan will appear, showing a picture of the
Socket SDIO In-Hand Scan Card. In the Scanner Device drop-down
menu, select Bluetooth CHS.
4. The screen will display a picture of the Cordless Hand Scanner. In the
Device is field, tap Enabled.
26