Lightwave Communications SCS3230 - Manual (Page 58)

ConsoleServer 3200 System Lightwave Communications
Rev. A - 58 - www.lightwavecom.com
The System will run through the system configuration and make the appropriate changes. Note
that some commands may show a 'fail' which may be normal for that instance. A 'fail' message
may mean that a command was not previously running, and so the command to kill that
application 'failed' (because it wasn't running). However, if you review the operations at a later
time, you will probably see an 'OK' message for the same prompts and options.
THE VERY FIRST TIME the System is run, the Setup script will automatically undergo a reset
and reboot to save the features to the system.
6.3.14 SAVE Command
Every other operation of the Setup script file, the root-level system administrator will have to
execute the SAVE COMMAND in order to preserve the changed values.