Lightwave Communications SCS3230 - Manual (Page 83)

A Lantronix Company SCS3230 System Administrator's Guide
15.00.038 - 83 - May 2002
F2 PULL-DOWN MENU TO LISTEN TO A DEVICE PORT PART 2
+---------------------------------------------------+
¦ SELECT SERVER ¦
+---------------------------------------------------¦
¦01 – DEVICE_1 02 - DEVICE_2 ¦
¦03 - DEVICE_3 04 - DEVICE_4 ¦
¦05 - 06 - ¦
¦07 - 08 - ¦
¦09 - 10 - ¦
¦11 - 12 - ¦
¦13 - 14 - ¦
¦15 - 16 - ¦
¦17 - 18 - ¦
¦19 - 20 - ¦
¦21 - 22 - ¦
¦23 - 24 - ¦
¦25 - 26 - ¦
¦27 - 28 - ¦
¦29 - 30 - ¦
¦31 - 32 - ¦
+---------------------------------------------------+
To monitor another user's server session, the user must type
LISTEN followed by the device
port name or number, or select LISTEN TO SERVER and a device port from the pull-down
menu. There must be a connection between a user and a device port for another user to be
able to listen to the connection. Also, the user must have permission to listen to the server as
defined by the system administrator in their user profile. Any user that can log in and has listen
permission for a device port may listen to a session on that device port. If the user does not
have permission to listen to a server, the SCS3230 will display the message
NO ACCESS TO
DEVICE CHANNEL.
When listen mode is entered, the screen will clear, and the message
LISTEN MODE, PRESS
ANY KEY TO EXIT.... will appear. To exit listen mode the user may press any key. The
user will also exit listen mode if the connection between the other (interactive) user and the
device port is broken.
Note that when selecting a server from a pull-down menu, only those device ports that are
installed shall be displayed.