Laser:display – Lightwave Communications LDX-3232 User Manual
Page 64
C O M M A N D R E F E R E N C E
LDX-3232 Device-Dependent Command Reference
48
LDX-3232
C H A P T E R
4
The LASer:DISplay command enables or disables (turns off) the display and some LEDs
Syntax Diagram
Parameters
An <nrf value>; -where 1 = on, 0 = off.
Notes
Turning the display and LEDs off means that a message of all blank spaces is sent to the
display, and most of the LEDs will be turned off.
Examples
"las:dis 1" -action: turns the LASER display on and enables the LASER indicator LEDs.
"Laser:dis Off" -action: turns the LASER display and disables the LASER indicator
LEDs.
The LASer:DISplay? query returns the value shown on the display.
Syntax Diagram
Notes
Returns the actual (6-character) string from the output buffer to the display. If the display
is disabled, it returns " .".
Examples
"LAS:DIS?" -response: "- 99.9", means the LASER display shows "- 99.9".
"Laser:DISp?" -response: " 0.6", means the LASER display shows " 0.6".
LASer:DISplay
F
RONT
P
ANEL
R
EMOTE
LASer:DISplay?
F
RONT
P
ANEL
R
EMOTE
<white
space>
<nrf
value>
:
:
LAS
DIS
:
LAS
DIS
:
?