Lanier 5625 - Manual (Page 26)

Basics
14
1
Starting the Machine
A
Press the operation switch to make the On indicator go on.
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (about 7 minutes), you can use the Auto Start
function.
⇒
P.53 “Auto Start”.
When the machine is set for user codes
A
Enter your user code using the number keys. Then press the { # } key.
Note
❒ To prevent others from making copies with your user code, press the { Clear
Modes } key and the { Clear/Stop } key simultaneously after copying.
Reference
For more about user codes
⇒
P.136 “General features”.
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
A
Press any key.
The machine will return to the ready condition.
Note
❒ The machine will also return to the ready condition when an original is set
in the document feeder, or when the platen cover or the document feeder
is opened.