Lanier 5625 - Manual (Page 40)

Copying
28
2
D
Press the { Start } key.
Note
❒ To stop the machine during a multi-copy run, press the { Clear/Stop } key.
❒ To return the machine to the initial condition after copying, press the { Clear
Modes } key.
Adjusting Copy Image Density
Image density affects the contrast of copies. With these functions you can control
the image density so that copies match originals. Make the selection you require
then set your originals and press the {
Start } key.
Auto image density
The machine automatically controls the image density.
Note
❒ Auto Image Density and Auto Color Select cannot be set together.
A
If Auto Color Selection mode is selected, select other color modes to cancel
it.
⇒
P.30 “Auto color selection mode”.
B
Press the { Auto Image Density } key to light the Auto Image Density indicator.