Lanier 5625 - Manual (Page 80)

Copying
68
2
C
Press the [Exit] key.
D
Select the copy paper size.
E
Set your originals, then press the { Start } key.
Margin Adjustment
You can make a margin by shifting the image to the left or right. This function is
convenient when you want to bind copies.
Note
❒ You can change the width of the binding margin as follows.
❒ The margin width default is as follows. You can change this default setting
with the user tools.
⇒
P.136 “General features”.
❒ If you set too wide a margin, areas you do not want to delete might be erased.
Reference
Regarding function that cannot be used together with this function,
⇒
P.103
“Combination Chart”.
Metric Version 0 - 20mm (in 1mm steps)
Inch Version 0" - 0.8" (in 0.1" steps)
Metric Version 10mm Left
Inch Version 0.4" Left