Auto start – Lanier 5625 User Manual
Page 65
Basic Procedure
53
2
A
Press the {
Interrupt
} key. The machine will stop the copy run and store the
present settings in memory before returning to the ready condition.
B
Remove the previous originals. Set your originals for interrupt copying on
the exposure glass or in the document feeder.
C
Make your copies.
D
After interrupt copying is completed, press the {
Interrupt
} key again. The
machine will recall the previous copy settings.
E
Reset the previous originals and press the {
Start
} key to resume the previ-
ous run.
Auto Start
If you press the {
Start
} key during the warm-up period, the {
Start
} key will blink
and the machine will start copying after the warm-up period.
A
Set your copy settings during the warm-up period.
B
Press the {
Start
} key.
Note
❒ To cancel Auto Start, press the {
Clear/Stop
} key.