Setting non- standard size originals, Setting non-standard size originals, 1setting non-standard size originals – Lanier 5625 User Manual
Page 36
Advertising
Basics
24
1
Setting Non-standard Size Originals
When copying from non-standard size originals, enter the original size so that
copy is well aligned.
Limitation
❒ You must set your non-standard size originals on the exposure glass.
Reference
For the standard sizes the machine can detect,
⇒
P.16 “Standard Size Origi-
nals”.
Note
❒ The dimensions you can enter must be within the following ranges:
A
Select the copy paper size.
B
Press the {
Menu
} key.
C
Make sure that the
[Custom Size Orig.]
is selected, then press the
[Select]
key.
Vertical size
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
Horizontal size
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
Advertising