Lopi Masonry Fireplace Factory Built (Metal) Fireplace Mobile Home Model: Pioneer Bay (Heritage Bay PI) - Manual (Page 33)

Safety Label
3 1
Travis Industries 4 0 5 1 2 1 6 9 3 5 0 8 0 5 1
Minimum Clearance to Combustible Materials
(Measured from insert top)
Adjacent Sidewall A 9 in/230 mm
Mantel B 13 in/330 mm
Top Facing C 10 in/255 mm
Side Facing D 6 in/150 mm
WARNING - DO NOT REMOVE OR COVER THIS LABEL
Listed Pelletized Solid Fuel Burning Appliance
For use in masonry or factory built (ZC) fireplaces.
Model: Heritage Bay PI Electrical Rating : 115 V., 60 Hz., 3 Amp
Report Date: June, 1997
Tested to: UL 1482/ULC S627/CSA B366.2/ASTM E1509-95
Maximum Input Rating: 3.5 lbs (1.60 kg)/hr
This pellet appliance has been tested and listed for use in manufactured homes
in accordance with Oregon Administrative Rules 814-23-900 through 814-23-909.
Install and use only in accordance with the installation and operating
instructions. Contact local building or fire officials about restrictions and
installation inspection in your area. Do not remove bricks or mortar from
masonry fireplace or alter factory built fireplace.
Combustible floor beyond hearth extension must be protected by a non-combustible material, extending 6 in/150 mm (E) to the front and 6 in/150 mm (F)
to the sides of door opening. Do Not Connect This Unit to a Chimney Flue Serving Another Appliance. Components Required for Masonry Fireplace and
Factory Built Fireplace Installation: Listed 3 in/75 mm or 4 in/100 mm diameter flue liner.
For use with 1/4 in/6 mm to 5/16 in/7 mm diameter pelletized wood fuels only. Replace glass only with 5 mm ceramic glass.
Do not route power cord beneath heater. The space beneath the heater must not be obstructed. Do not obstruct combustion air openings. Operate only with
viewing door closed and ash tray in place. Keep all furnishings well away from heater. Do Not Overfire – If Heater or Chimney Connector Glows, You Are
Overfiring. Inspect And Clean Chimney Frequently – Under Certain Conditions of Use, Creosote Buildup May Occur Rapidly.
CAUTION
- HOT WHILE IN OPERATION.
- DO NOT TOUCH, KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.
- CONTACT MAY CAUSE SKIN BURNS. SEE THE OWNER’S MANUAL.
R
Serial No.
1997
1998
1999
2000
Jan.
Feb.
Mar.
Apr.
May
Jun.
Jul.
Aug.
Sep.
Oct.
Nov.
Dec.
DATE OF MANUFACTURE
Travis Industries, Inc.
10850 117th Pl. NE
Kirkland, WA 98033
INSERT CLEARANCE DIAGRAM
MANTEL
F
ACIA
OR TRIM
SIDEW
ALL
B
A
F
E
C
D
HEARTH EXTENSION
Pellet
Insert