Polycom SpectraLink 1725-36033-001 - Manual (Page 16)

SpectraLink 8000 SVP Server: Administration Guide for SIP
16 PN: 1725-36033-001_G.doc
The Front Panel of the SVP Server
The SVP Server’s front panel contains ports to connect to power, the
LAN, and to an administrative computer via an RS-232 port. Status
LEDs supply information about the SVP Server’s functioning.
RS-232 Port: male DB-9 connector (DTE) used for RS-232 connection to
a terminal, terminal emulator, or modem for system administration.
LEDs
LNKOK : Lit when there is a network connection.
ACT : Lit if there is system activity.
COL : Lit if there are network collisions.
NETWORK : Port to wired (Ethernet) LAN.
ERROR : Lit when the system has detected an error.
STATUS : Indicate system error messages and status.
1 : Heartbeat, indicates gateway is running.
2 : If active calls.
3: SVP Server is locked.
4: Currently unused.
5 : This SVP Server is the cluster master.
PWR (power jack): Connects to the AC adapter supplying power to the
system.
Use only the Polycom-provided Class II AC Adapter with output 24V
DC, 1A.
L
N
K
O
K
A
C
T
C
O
L
Status E
R
R
O
R
3 4 5 1 2 PWR
NETWORK
RS-232