Polycom SpectraLink 1725-36033-001 - Manual (Page 24)

SpectraLink 8000 SVP Server: Administration Guide for SIP
24 PN: 1725-36033-001_G.doc
Connecting via telnet
Telnet can only be used after the SVP Server’s IP address is
configured.
The telnet method of connection is used for routine maintenance of
the SpectraLink Server for both local and remote administration,
depending on your network.
To connect via telnet, run a telnet session to the IP address of the SVP
Server. Once you connect and log in, the NetLink SVP-II System menu
displays.
The NetLink SVP-II System Menu
The main menu displays as shown here:
System Status
Menu for viewing error messages, status of operation and software
code version.
SVP-II Configuration
Allows you to set the mode and reset the system.