Polycom SpectraLink 1725-36033-001 - Manual (Page 25)

Configuring the SpectraLink 8000 SVP Server
PN: 1725-36033-001_G.doc 25
Network Configuration
Allows you to set network configuration options, including IP
address and hostname.
Change Password
Allows you to change the password for SVP Server access.
Network Configuration
The IP address and other network settings are established via the
Network Configuration screen. This is also where you may optionally
establish a hostname and enter the IP address of the location of any
software updates you may obtain from Polycom. See Chapter 5
Software Maintenance for more information about installing software
updates via TFTP.
Scroll to
Network Configuration and select by pressing Enter. A screen
similar to the following appears:
Note the navigation options at the bottom of the screen. Press Enter to
change a value, ESC to exit the screen, and the arrow keys to move
the cursor.