Polycom SpectraLink 1725-36033-001 - Manual (Page 28)

SpectraLink 8000 SVP Server: Administration Guide for SIP
28 PN: 1725-36033-001_G.doc
DHCP setting is only valid when the IP address is also acquired using
DHCP.
When the name services are set up correctly, the SVP Server can
translate hostnames to IP addresses. Using telnet, it is also possible
to access the SVP Server using its hostname instead of the IP
address.
Workgroup
As set in WINS.
Syslog Server
Logging may be set to either DHCP (see DNS above) , an [IP address] or
NONE . If Syslog is set, a message is sent to the syslog server when an
alarm is triggered.
Disable Telnet service
Prevents Telnet access into the SVP Server. Reset the SVP Server for
the change to take effect. Upon reset the Telnet protocol server is not
started.
The SVP Server must be reset in order to set the configuration options.
If the SVP Server is in Maintenance Lock , you must manually reset it by
selecting the Reset option in the SVP-II Configuration screen and then
pressing Y upon exit.