TANDBERG 6000MXP - Manual (Page 100)

100
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
Kiosk OneClickConnect: <On/Off>
If turned On, you can make a call with a single click on the green call button on the remote control. The system will call the first entry in “My Contacts” in the Phone Book. NOTE:
This functionality will only work in Kiosk Mode. If set to Off: Does not allow for one click connect in Kiosk mode.
Example: xconfiguration kiosk oneclickconnect: off
LocalLayout Mode: <Full/2Split/POP/POPwide>
Defines the picture layout to use on the local main monitor. POP and POPWide should only be used on wide screen monitors.
Example: xconfiguration locallayout mode: full
LocalLayout Toggle: <PIP/POP>
Defines the behaviour of the Layout button on the remote control.
If set to POP the system will toggle through the different LocalLayout modes when pressing the Layout button.
If set to PIP, the system will display a PIP when pressing the Layout button.
Example: xconfiguration locallayout toggle: pip
Logo: <On/Off>
If set to On the system will display a company logo will appear in the background of the welcome menu.
NOTE! The TANDBERG logo will be displayed if no other company logo is uploaded.
Example: xconfiguration logo: on
LoS Duration Exponent: <10..30>
Example: xconfiguration los duration exponent: 15
The duration of the LoS-pulse can be calcu-
lated from:
Duration =
Offset + 2 Exponent
bit rate
LoS configurations are relevant
for systems with NET interface
(External Network) only.
LoS Duration Offset: <0..65534>
Offset is specified in milliseconds
Example: xconfiguration los duration offset: 100
LoS Inhibit: <0..65534>
Specifies the number of seconds to wait before issuing a new LOS pulse if the codec regains and subsequently loses H.221 frame align-
ment.
Example: xconfiguration los inhibit: 15
Kiosk
cont...
— LoS