TANDBERG 6000MXP - Manual (Page 198)

198
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
H323Gatekeeper (status = Required / Discovering / Discovered / Authenticating / Authenticated / Registering / Registered / Rejected / Inactive )
If status = Inactive the following will be included:
<Nothing>
Example:
*s H323Gatekeeper (status=Inactive): /
*s/end
If status = Required / Discovering / Discovered / Authenticating/ Authenticated / Registering / Registered the following will be included:
Alias:
Address:
Port:
Example:
*s H323Gatekeeper (status=Registered):
Alias: “5584582”
Address: “10.47.9.1”
Port: 1719
*s/end
If status = Rejected the following will be included:
Address:
Port:
Cause:
Example:
*s H323Gatekeeper (status=Rejected):
Address: “10.47.9.1”
Port: 0
Cause: “Duplicate alias”
*s/end
H323Gatekeeper