VIEWSONIC WPD-100 VS13789 - Manual (Page 18)

ViewSonic WPD-100 12
‘n’ for 802.11n , ‘g; for 802.11g , and ‘b’ for 802.11b .
WPS icon will appear when the access point supports WPS. If the
access point uses encryption, a key icon will appear.
Note: When the access point supports WPS and WPS icon is appeared,
you will not see the key icon here even through the access point uses
encryption.
D Shows the signal strength of access point by percentage.
E
Shows the bar graph of the signal strength.
If you can not see the access point you wish to connect here, please click
‘Rescan’ button to scan for access point again, until the one you preferred is
displayed. You may have to click ‘Rescan’ for more than two times before you
can see the access point you wish to use here.
If you still can not see the access point you wish to use after clicking ‘Rescan’
for more than five times, please move your computer closer to the location
where the wireless access point is, or see instructions in Chapter 4-2
‘Troubleshooting’.
If you wish to see detailed information for a specific access point, please
double-click on it, and you’ll be provided with its detailed information.