VIEWSONIC WPD-100 VS13789 - Manual (Page 24)

ViewSonic WPD-100 18
Here are descriptions of every setup item:
Item Name
Description
Profile Name You can give this profile a name. Every profile needs a
unique name.
SSID Please input the SSID of this access point. If you
selected an access point from the list, and its SSID is not
hidden, the SSID will be filled automatically; however,
you can modify the SSID by yourself.
Network Type Please select the network type: Ad hoc or Infrastructure.
If you’re connecting to an access point, please select
‘Infrastructure’; for point-to-point wireless connection
(i.e. connecting to another computer using Ad Hoc
mode), please select Ad hoc here.
If you selected an access point from the list above,
please keep this field unchanged.
Tx Power You can select the wireless output power here. If you’re
not too far from access point (good signal reception),
you can select a lower output power to save energy; for
a distant access point, you can select a higher output
power.
It’s suggested to select ‘Auto’ to let setup utility decide
the best output power for you.
Preamble Select the preamble for Ad hoc mode here. Available
options are ‘Auto’ and ‘Long’.
It’s suggested to select ‘Auto’ to let setup utility decide
the preamble for you.
Channel You can select the radio channel number for AdHoc
mode here.