VIEWSONIC WPD-100 VS13789 - Manual (Page 35)

ViewSonic WPD-100 29
In ‘WMM Setup Status’ block, current WMM settings will be displayed. And
here are descriptions of every setup item:
Item Name Description
WMM Enable Check this box to enable WMM function. Please click
‘Apply’ button on the right of this check box after you
check or uncheck this box, so corresponding settings in
this window will be activated or deactivated respectively.
WMM - Power
Save Enable Check this box to enable WMM power saving mode to
save energy, and let your computer’s battery live longer.
You also have to select WMM power save modes here:
AC_BE: Best Performance
AC_BK: Worst Performance
AC_VI: Video data has priority
AC_VO: Voice data has priority
Direct Link Setup
Enable If you have another WMM-enabled wireless device, you
can enter its MAC address here, then click ‘Apply’
button, and this network card will establish a direct link to
the wireless device you specified here.
You also have to specify the timeout value of this
directly-linked wireless device. Valid values are from 1 to
65535 (seconds), and input ‘0’ for infinity.
If you want to remove a specific wireless device from
direct link table, select the device and click this button to
remove it.