VTech I6785 - Manual (Page 6)

www vtechphones com 6
• CAUTION: To reduce
the risk of fire or injury,
read and follow these
instructions:
1 Use only the battery
supplied, or equivalent
2 Do not open or
mutilate the battery
Released electrolyte
is corrosive and may
cause damage to the
eyes or skin It may be
toxic if swallowed
3 Exercise care in
handling battery in
order not to short the
battery with conducting
materials such as
rings, bracelets, and
keys The battery or
conductor may overheat
and cause burns
• if you need to install
your phone within the
same room as other
cordless phones or
wireless products, you
may need to select
a different channel
for your router and or
change the channel on
your phone’s handsets
• Connect the power and
telephone line cords
to the underside of the
base as illustrated
Connect power to base unit/chargers
1 Plug the power adapter into an electrical outlet not controlled by a wall switch, and the
connector into the bottom of the base unit
2 Choose the location for your charger, and plug its power supply into an electrical
outlet
To power outlet To telephone outlet
Installation
Connect to phone line
Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone
base Then plug the other end of the cord into the wall telephone outlet