Garmin GPSMAP 195 - Manual (Page 13)

TAKEOFF TOUR
The rocker keypad is
used to enter an airport
identifier. To start, high-
light the data entry field
and press
† †
.
Enter the airport identifi-
er using the
R R
keypad,
UP/DOWN arrows to
change characters or
RIGHT arrow to move to
the next character, then
press
† † when finished.
11
USING MENUS (cont.)
A main menu is provided to make changes to system settings.
Selecting miles per hour instead of knots, using the built-in simula-
tor mode, creating routes or performing E6-B calculations are all
accomplished from the main menu.
To view the main menu:
1. Press the
O
key twice.
You may enter data, such as airport identifiers and user waypoint
coordinates, on certain pages. To enter data, you must first highlight
(using the
R keypad) the area on the display where it will be placed.
A rule-of-thumb to remember: The data entry process begins and ends by
pressing
T
. The
R
keypad is then used to enter the actual data.
For example, to enter “KIXD” as a destination airport:
1. Display the select GOTO destination page by pressing the
G
key.
2. Highlight the data entry field using the
R
keypad.
3. Press
T
.
4. Use the UP/DOWN arrows of the
R
keypad to select the first
character.
5. Use the RIGHT arrow of the
R
keypad to move to the next
character. If you make a mistake, back up with the LEFT arrow. To
clear the data field entirely, press the LEFT arrow repeatedly until the
field is blank.
6. Repeat steps 3 and 4 until the identifier is selected (see right).
7. Press
T
to accept the identifier.
ENTERING DATA
gps 195 manual C 7/1/99 4:48 PM Page 11