Garmin GPSMAP 195 - Manual (Page 90)

REFERENCE
To perform trip and fuel
planning for cumulative
totals for a selected route,
choose the ‘ALL’ option from
the leg field.
To calculate trip and fuel
values for a particular route
leg, select the desired route
leg from the leg field.
88
TRIP & FUEL PLANNING (cont.)
To use the route planning mode:
1. Highlight the ‘Trip & Fuel Planning’ option from the main menu page
and press
T
.
2. If the plan field is not set to ‘Route’, press
O
and select it from the
options page.
3. Highlight the route number field and press
T
.
4. Select the route you want to plan and press
T
.
5. The leg field will be highlighted. Press
T
.
6. To plan the cumulative totals for all route legs, select the ‘ALL’
option—or use the
R
keypad to select a specific route leg to plan.
Press
T
to confirm.
7. Enter the planned speed for your trip, or press
O
to select your
current SPD for the speed value.
8. Enter an hourly fuel flow (if desired) in the fuel field, and press
T
.
9. Enter the date and time of your departure (the default date and time
will be the current date and time in UTC or local time, whichever you
have selected) and press
T
.
The bottom of the page will now display the planning information
for the route leg selected or the cumulative values for the entire route.
The route planning mode will also let you plan cumulative totals for
multiple route legs by using the ‘Hold First Waypoint?’ selection from
the options window.
To plan multiple route legs:
1. Follow steps 1-6 above to select the last route leg you want to plan.
For example, select leg 03 if you want to plan cumulative totals for
the first three legs of the route (without including the rest of the
route).
2. Enter the speed, fuel and date/time values as described in steps 7-9
above.
3. Press the
O
key to display the options page.
4. Select the ‘Hold First Waypoint?’ option and press
T
. The
cumulative totals from the first route waypoint to the end of the
selected leg will appear at the bottom of the page.
The fuel and trip planning submenu also allows you to calculate
the sunrise and sunset times for your present position or any
waypoint for a selected date. To use this feature the ‘from’ and ‘to’
waypoints listed at the top of the page must be the same waypoint (or
blank to figure times for present position).
Main Menu: Planning
gps 195 manual C 7/1/99 4:49 PM Page 88