Garmin GPSMAP 195 - Manual (Page 47)

REFERENCE
You may quickly select a
previously stored route
using the GOTO options
page.
‘Select Approach?’ allows
you to replace the GOTO
destination airport with
the final course waypoints
of a published approach.
This option is also used to
select a different approach
to the same airport.
45
GOTO A HIGHLIGHTED NAME (cont.)
To GOTO a highlighted waypoint name:
1. Select the desired waypoint by highlighting its name.
2. Press the
G
key to designate this waypoint as the destination.
3. Press
T
to confirm the selection.
The GOTO options page lists additional GOTO options that let you
select a published approach for an airport, select a route to navigate
or start a TracBack route.
To display the GOTO options:
1. Press
O
(After you’ve already pressed
G
).
To select a menu option:
1. Highlight the desired option and press
T
.
The following options are available:
• Select Route?— allows you to quickly select a stored route
(one that you previously entered) for navigation.
To select a route to navigate:
1. Highlight the ‘Select Route’ option and press
T
.
2. Select the desired route and press
T
.
• Select Approach?— allows you to replace an airport way-
point with the waypoints that comprise the final course seg-
ment of a published approach to the airport.
To select an approach to an airport:
1. Select an airport with a published approach as your GOTO destina-
tion and press
T
. With ‘GOTO?’ highlighted, press
O
.
2. Highlight the ‘Select Approach?’ option and press
T
.
3. Select the desired approach from the list and press
T
. The air-
port reference waypoint is replaced with the approach waypoints.
GOTO OPTIONS PAGE
G G KEY
gps 195 manual C 7/1/99 4:48 PM Page 45