Garmin GPSMAP 195 - Manual (Page 34)

REFERENCE
Use the
A A
key to
zoom in or out to the
desired level of detail.
Select the runway area
map and pan around the
map display using the
R R
keypad.
32
AIRPORT INFORMATION (cont.)
The runway page also allows you to zoom in, zoom out and pan
the screen to see the level of detail you desire. For larger airports you
may zoom out and/or pan around the runway area map to see
additional detail.
To zoom in or out on the runway page:
1. Press the UP arrow of the
A
key to zoom out. The higher scale
setting will show a larger area, but in less detail.
2. Press the DOWN arrow of the
A
key to zoom in. The lower
scale setting will show a smaller area, but in greater detail.
To pan the runway area map:
1. Highlight the runway area map using the
R
keypad. When the
runway area map is highlighted the outline border becomes wider.
2. Press
T
to activate the panning function and use the
R
keypad
to pan in the desired direction. A cursor will appear and as it
reaches the edge of the runway area map, the map will scroll under
the cursor.
3. If you zoom in or out while panning, the map will be recentered over
the last cursor position.
4. To exit the panning function, press the
Q
key.
The last airport page is the approach page, which displays the final
course segment and waypoints for each published approach to the
selected airport. The GPSMAP 195’s Jeppesen database includes ILS,
localizer, RNAV, GPS, VOR, VOR/DME and NDB approaches. Only
one approach course is shown at a time. If there are additional
approaches for the selected airport, you may view the additional
approaches from the approach designation field.
Approach
Designation Field
Other Available
Airport Pages
Approach
Waypoints
Waypoint
Category
Approach
Display
W W
KEY
gps 195 manual C 7/1/99 4:48 PM Page 32