Installation, 1 wall mounting, 2 panel mount version – Liquid Controls IT375 User Manual
Page 26: Rear view of it375 panel mount case
Sponsler, Inc.
Model IT375
Installation Pg. 26
9. INSTALLATION
9.1 WALL MOUNTING
A wall mounting bracket is supplied with each instrument. Round head screws should be used to attach the bracket to the
wall (countersunk screws should not be used). The bracket is mounted first with the tray section at the bottom. The
instrument is then mounted on the bracket with two screws as shown below.
9.2 PANEL MOUNT VERSION
The panel mount version of the Model IT375 is supplied with two panel mount brackets and plug-in terminals which are
accessible from the rear of the instrument.
A diagram of the rear panel is shown below:
Rear View of IT375 Panel Mount Case
The cutout for the panel mount version is 141mm (5.55") wide x 87mm (3.43") high.
MODEL IT375
SIGNAL
INPUT
HIGH
ALARM
RELAY 2
(PULSE)
(INPUT)
LOW
ALARM
RELAY !
9-28v
POWER/4-20 !mA OUTPUT LOOP