Liquid Controls IT375 - Manual (Page 5)

Sponsler, Inc. Model IT375 Introduction Pg. 5
Flowmeter Input:
Entity parameters on the flowmeter enable connection to a wide range of approved sensors.
Input parameters are:
Ui = 24V
Ii = 20mA
Pi = 320mW
The internal capacitance and inductance seen on these terminals is 0.002uF and 0mH.
Output parameters are:
Uo = 10.0V
Io = 9.0mA
Maximum allowed external capacitance is 60µF.
Maximum allowed external inductance is 1.5H.