HP StoreEver TapeAssure Software - Manual (Page 21)

2. In the toolbar, double-click the host name in the host list, or select Actions
→Run Diagnostics
or click the Run Diagnostics button.
Either a new browser tab or window will display a list of devices attached to the selected
service host, depending on your browser configuration. The WebGUI is easier to use if new
windows open in tabs by default. For instructions on configuring your browser, see the browser
documentation.
Using the LTT Service diagnostics window
The LTT Service diagnostics window displays a list of devices attached to a service host and includes
options to see device information, pull a support ticket, run tests and utilities, and manage firmware.
Identification and configuration screen
The identification and configuration screen provides an overview of the selected hardware device
and its current configuration and status. To refresh the screen with the current information from the
LTT Service, click Refresh.
Figure 4 Identification and configuration screen
Identification and configuration information for the device
•
Product ID
•
Drive Technology — (DLT/SDLT/VS/LTO)
•
Drive Serial #
•
Firmware Revision
•
OBDR Capability — Whether One Button Disaster Recovery is enabled.
•
Worm Capability — Whether the drive supports WORM media.
•
TapeAssure drive write health summary — Assessment of the drive’s health based on recent
write operations.
Information about the cartridge currently in the drive
•
Cartridge type
•
Capacity
•
Cartridge partitioned — Whether the cartridge has been formatted using LTFS.
Using the LTT Service diagnostics window 21