HP StoreEver TapeAssure Software User Manual
Page 51
Advertising
When to run
Run this utility when you want to erase a tape that has been written
previously.
Average duration
Quick erase takes about one minute. Full erase takes from 2 to 4 hours.
Secure erase takes between 10 to 25 hours.
Other notes
Any data on tape will no longer be accessible after this test.
The test will not run with a tape that has been partitioned.
Available for
Ultrium 1 and 2, LTO3, LTO4, LTO5, and LTO6.
Device-specific utilities
51
Advertising
This manual is related to the following products: