HP XP P9500 Storage - Manual (Page 410)

Specifies the HBA port ID of the HBA port for which I/O information is to
be displayed. The subsequent parameters specify the display interval and
count. The format for the subsequent parameters are as follows:
-intvl interval
Specifies the interval at which I/O information is to be displayed, in
the range from 1 to 60 (seconds). When this parameter is omitted,
the default (3 seconds) is applied.
-count count
Specifies the number of times I/O information is to be displayed, in
the range from 1 to 999. When this parameter is omitted, the default
(10) is applied.
-t
Omits the title for each information item.
Table 6-22 Items displayed as I/O information for each HBA port
Item Description
HbaID HBA port ID
Port.Bus Port (host port number in hexadecimal) and Bus (bus number
in hexadecimal) separated by a period
Physical
Device HBA port configuration information. The names of the physical
device files under the /devices directory are displayed.
StartTime Date and time in which the command began executing, in the
format yyyy/mm/dd hh:mm:ss
ElapsedTime Time elapsed since command execution began, in the format
hh:mm:ss
IO-Count Total I/O count for the displayed paths during a specified
interval indicated by a whole number (indicated by a decimal
number). The maximum value that can be displayed is 2
32 - 1
(4294967295). If the total I/O count reaches the maximum
value, it is reset, and the count is re-started from 0.
IO-Errors Total I/O error count for the displayed paths during a specified
interval, indicated by a whole number (indicated by a decimal
number). The maximum value that can be displayed is 2
32 - 1
(4294967295). If the total I/O error count reaches the
maximum value, it is reset, and the count is re-started from 0.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr monitor -hbaid 0 -intvl
30 -count 3
HbaID : 00000
Port.Bus : 0001.0000
Physical Device : /devices/pci@8,70000/JNI,FCE@2
StartTime : yyyy/mm/dd hh:mm:ss
ElapsedTime IO-Count IO-Errors
00:00:30 223 10
00:01:00 1140 1
6-70
Command Reference
Hitachi Dynamic Link Manager User Guide for Solaris ®