HP XP P9500 Storage - Manual (Page 453)

For details on the settings functionality, see set (Sets Up the Operating
Environment) on page 6-17 .
#3
You can specify this key only in the following cases:
¢
For a new installation:
When on is specified for the auto_failback key in the installation
information settings file
¢
For an upgrade installation or re-installation:
When on is specified for the auto_failback key in the installation
information settings file, or when automatic failback is enabled in the
installation pre-settings
#4
If you want to enable intermittent error monitoring, specify this key after
specifying the auto_failback and auto_failback_interval keys.
#5
The checking interval can be set regardless of whether the dynamic I/O
path control function is enabled or disabled.
The following is an example of an installation-information settings file:
[INSTALLATION_SETTINGS]
installfile_location=/cdrom/cdrom0
logdir=/var/tmp
licensekeyfile=/var/tmp/hdlm_license
driver_config=y
restart=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
load_balance_same_path_use_times=1
lbex_usetimes_limit=100
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
intermittent_error_monitor=on
intermittent_error_monitor_interval=30
intermittent_error_monitor_number=3
dynamic_io_path_control=off
dynamic_io_path_control_interval=10
Utility Reference
7-39
Hitachi Dynamic Link Manager User Guide for Solaris ®