HP XP P9500 Storage - Manual (Page 491)

Message
ID
Message Text Explanation
KAPL04011
-E
Could not output the error log file. Details
The log information could not be
output to the error log file /var/
opt/DynamicLinkManager/log/
dlmmgr[1-16].log.
Action
Make sure that the disk has
enough free capacity.
KAPL04012
-E
Could not create a communication
pipe. RC = aa...aa
Details
HDLM manager could not start
normally because it was unable
to create a pipe file, which is
used in communication with
HDLM commands.
aa...aa: OS error code (decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL04013
-E
Input is impossible via the
communication pipe. RC = aa...aa
Details
Data could not be read from the
pipe file while communicating
with an HDLM command.
aa...aa: OS error code (decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL04014
-E
Output is impossible via the
communication pipe. RC = aa...aa
Details
Messages
8-35
Hitachi Dynamic Link Manager User Guide for Solaris ®