Australian Monitor Zone Mix 3 - Manual (Page 11)

SECTION A
MIC 1, 2
P/P
HPF - 160Hz
RELEASE TIME
MIC1 refers to MIC/LINE 1 input, and MIC2 refers to MIC/LINE 2 input.
Phantom Power +15VDC. Default is ON.
The high pass filter has a crossover at 160Hz and a slope of -6dB/oct. Default is OFF.
Prog 4 Priority release time trimpot 1sec-25sec - Default is 10sec.
See Functional Notes on page 9.
Sum Input level 0dB to Off - Default is -6dB.
This pot is for the chime that sounds when a page is made using the Paging Station.
Paging Chime level 0dB to Off - Defaults is -6dB.
This section is repeated 3 times (one per zone).
Zone Eq Bypass switch - Eq In/Eq Out. Default is Eq In.
Sum Gain Adjust
Chime Level Adjust
SECTION B
SECTION C
INSTALLATION SERIES
Australian Monitor
11
NOTE: PCB markings should be noted carefully as MIC2 is a mirror image of MIC1.
EQ
IN
EQ
OUT