Australian Monitor Zone Mix 3 - Manual (Page 12)

12
INSTALLATION SERIES
Australian Monitor
SECTION D
SECTION E
This section is repeated 3 times (one per zone).
MIC1 refers to MIC/LINE1 input, and MIC2 refers to MIC/LINE2 input.
Default is EN (enabled).
Priority Release Time jumper socket - 0.5,5,15 sec. Default is 5sec.
Program 4 Priority jumper socket - Default is EN (enabled).
Output Mode switch - Mono/Stereo. Default is Stereo.
See Functional Notes on page 9 for explanation of priority functions.
PRIORITY
MIC1, 2
MUTE RELEASE
PROG 4 PRIORITY
MONO-STEREO
These two sockets are used when linking two
ZoneMix3 units.
See Functional Notes on page 9 for explanation of
linking.
All input sources are connected to the Master unit. In
this unit the linking header should be plugged into
the connector labelled LINK-MASTER.
In the other (Slave) unit, the linking header should be
moved to the connector labelled LINK-SLAVE.
By default, all units ship as Masters.