Controls introduction, Paging station – Australian Monitor Zone Mix 3 User Manual

Page 16

Advertising
background image

1 ZONE select

2. ALL page

These buttons, when pressed, will page to that
zone. With the button held down, talk into the
microphone. There is a label space to the
right of the button to allow labelling of the
zone.

This button allows paging to all zones. Hold
down the button to talk.

3 GAIN

To accommodate different speech levels,
there is a gain control on the base of the
ZM3M. This ships set to minimum and may be
adjusted to suit. Increasing this control too far
may cause the paging station to distort if loud
or close speech levels are encountered.
Caution should be used if trying to achieve
high gain levels for distant or lectern speech
styles as feedback may occur.

Controls

Introduction

The ZM3M is a slim line paging microphone that provides the user the ability to page into any
combination of zones from a remote location. Running both audio & data down inexpensive
& industry standard CAT5 cable the ZM3M is simple to install.

8. PAGING STATION

Base Plate

section

16

INSTALLATION SERIES

Australian Monitor

1

2

3

115.0mm

178.0mm

INSTALLATION SERIES

Australian Monitor

ZM3M

1

2

3

Advertising