Executing self-test, Executing self-test -3 – Agilent Technologies Agilent E5250A User Manual
Page 53
Advertising
Agilent E5250A User’s Guide, Edition 11
3-3
Executing Self-Test and Leak Test
Executing Self-Test
Executing Self-Test
The Self-Test of the E5250A consists of the following three tests:
Table 3-1
E5250A Self-Test Items
Test Item
Description
Executed by
Refer to
Controller
Test
Checks the operation of
the E5250A firmware.
Turning on the E5250A.
Entering SCPI Command.
Using Self-Test Utility.
Front
Panel
Interface
Test
Checks the operation of
the LEDs and key that
are on the E5250A front
panel.
Entering SCPI Command
Using Self-Test Utility.
Relay Test
Checks the operation of
the relays on the cards
installed in the E5250A.
Pressing the Local/
Self Test key.
Entering SCPI Command.
Using Self-Test Utility.
Advertising